manualshive.com logo in svg

Siemens TM Timer DIDQ, Commissioning Manual

Share
Download
Siemens TM Timer DIDQ Commissioning Manual Download Page 44

3. In the "Hardware Catalog" window, navigate to the TM Timer DIDQ 16x24V technology 

module via Technology modules -> Time-based IO.

4. Drag the technology module to the desired slot in the device view.

Figure 3-18 TM Timer DIDQ 16x24V technology module inserted in the project

Note
The interface module and the TM Timer DIDQ technology module must be configured for 

isochronous operation. Check the settings in the inspection window (device configuration 

of the ET 200MP interface module must be open) under tab PROFINET interface -> 

Extended options -> Isochronous mode.

Properties of the technology module 

The object properties for the TM Timer DIDQ technology modules can be set in the inspection 

window (the technology module must be selected in the device view) in the "General" tab.

Configuring
3.3 SIMOTION SCOUT TIA

Technology Modules TM Timer DIDQ for SIMOTION SCOUT and SIMOTION SCOUT TIA

44

Commissioning Manual, 01/2015

Summary of Contents for TM Timer DIDQ







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands