manualshive.com logo in svg

Siemens TM Timer DIDQ, Commissioning Manual

Share
Download
Siemens TM Timer DIDQ Commissioning Manual Download Page 23

3.2.2

Requirements for operation

Preconditions

The following preconditions must be met before operating TM Timer DIDQ technology module.
1. Your system hardware including the technology module is installed and wired.
2. You have physically connected the technology module via an ET 200SP interface module, 

version HF or HS, with a SIMOTION controller via the PROFINET IO interface (see Chapter 

System integration (Page 17)).

3. You have created a project with a SIMOTION controller with PROFINET interface in 

SIMATIC STEP 7 or in SIMOTION SCOUT and configured PROFINET IRT. For 

isochronous operation, the following settings must be made at the SIMOTION controller.

Figure 3-1

Isochronous setting at the SIMOTION controller

Note
For further information on configuration of the PROFINET communication please refer to the 

SIMOTION SCOUT Communication Manual.

Note
The procedures contained in this section assume that the user has a general understanding 

of SIMATIC STEP 7 and SIMOTION SCOUT.

Configuring

3.2 SIMOTION SCOUT

Technology Modules TM Timer DIDQ for SIMOTION SCOUT and SIMOTION SCOUT TIA

Commissioning Manual, 01/2015

23

Summary of Contents for TM Timer DIDQ







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands