manualshive.com logo in svg

Siemens TM Timer DIDQ, Commissioning Manual

Share
Download
Siemens TM Timer DIDQ Commissioning Manual Download Page 27

Properties of the technology module

The object properties for the TM Timer DIDQ technology modules can be opened in the HW 

configuration via the context menu or by double-clicking the module in the detail view. 
1. To open the context menu, select the TM Timer DIDQ technology module with the right 

mouse key.

2. Select Object properties. The following dialog box opens.

Figure 3-6

Properties of the TM Timer DIDQ 10x24V technology module 

You can view or change the following properties in the object properties:
● General tab

– Short designation, order number, name 

The short designation, the information below it, and the ordering number are identical 

to the entries in the Hardware Catalog window. 

In the Name field you can find the short description of the module, which can be changed 

according to your specifications. When you change the description, the new description 

is displayed in the configuration table.

– Comments

You can enter, for example, the application of the module in this field.

● Addresses tab

Here you can assign the module one start address each for the inputs and outputs. The 

end addresses are calculated automatically.

Configuring

3.2 SIMOTION SCOUT

Technology Modules TM Timer DIDQ for SIMOTION SCOUT and SIMOTION SCOUT TIA

Commissioning Manual, 01/2015

27

Summary of Contents for TM Timer DIDQ







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands