Siemens SITRANS LR260, Quick Start Manual

Page: 18 / 224

Page EN-16 SITRANS LR260 (HART) – QUICK START MANUAL A5E32106122
mmmmm
English
1.3. Sensor Units
Selects the units for the Quick Start variables (high and
low calibration point, and level, distance, or space).
1.4. Operation
1.5. Low Calibration Point
Distance from Sensor Reference to Low Calibration Point: usually process empty level. See
Operation (1.4.) for an illustration.
1.6. High Calibration Point
Distance from Sensor Reference to High Calibration Point: usually process full level. See
Operation (1.4.) for an illustration.
Operation
types
NO
SERVICE
The SITRANS LR260 stops updating measurements and associ-
ated loop current. Last valid measurement is displayed.
LEVEL
Distance to material surface referenced from Low Calibration
Point (process empty level).
SPACE
Distance to material surface referenced from High Calibration
Point (process full level).
DISTANCE
Distance to material surface referenced from Sensor Reference
Point.
Default: Distance
Values
Range: 0.0000 to 30.000 m
Values
Range: 0.0000 to 30.000 m
Options
M, CM, MM, FT, IN
Default: M
high cal.
point
low cal.point
level
space
distance
sensor reference point