Siemens SIRIUS 3RW40, Manual

Page: 70 / 212

Operation
10.2 Operator controls, displays, and connections on the 3RW40
SIRIUS 3RW30 / 3RW40
70
Manual, 01/2010, 535 1995-02 DS01
10.2 Operator controls, displays, and connections on the 3RW40
1 Operating voltage (three-phase mains voltage)
2 Control supply voltage
3 IN start input
4 ON / RUN output
5 BYPASSED output
6 DEVICE / STATE / BYPASSED / FAILURE status LEDs
7 OVERLOAD, RESET MODE status LEDs
8 TEST / RESET button
9 Current limiting
10 Ramp-up time
11 Starting voltage
12 Ramp-down time
13 Trip class
14 Motor current
15 Thermistor input (can be optionally ordered with 24 V AC/DC control voltage for 3RW40 2. to
3RW40 4. devices)
16 Fault output
17 Motor terminals
18 RESET MODE button (behind the label on the 3RW40 2., refer to the diagram below)
1
2
3 4
10
6
9
5
7
8
11
12
16
17
13
14
15
18