Siemens siprotec SJ62, User Manual

Page: 647 / 715

A Appendix
645
SIPROTEC 4, 7SJ62/63/64 Handbuch
C53000-G1140-C147-A, Edition 07.2015
302 CHANGE Change Group Group A
Group B
Group C
Group D
Binary Input
Protocol Group A Change to Another Setting
Group
401 WAVEFORMTRIGGER Osc. Fault Rec. Save w. Pickup
Save w. TRIP
Start w. TRIP Save w. Pickup Waveform Capture
402 WAVEFORM DATA Osc. Fault Rec. Fault event
Pow.Sys.Flt. Fault event Scope of Waveform Data
403 MAX. LENGTH Osc. Fault Rec. 0.30 .. 5.00 sec 2.00 sec Max. length of a Waveform
Capture Record
404 PRE. TRIG. TIME Osc. Fault Rec. 0.05 .. 0.50 sec 0.25 sec Captured Waveform Prior to
Trigger
405 POST REC. TIME Osc. Fault Rec. 0.05 .. 0.50 sec 0.10 sec Captured Waveform after Event
406 BinIn CAPT.TIME Osc. Fault Rec. 0.10 .. 5.00 sec;
∞
0.50 sec Capture Time via Binary Input
610 FltDisp.LED/LCD Device, General Target on PU
Target on TRIP Target on PU Fault Display on LED / LCD
611 Spont. FltDisp. Device, General YES
NO NO Spontaneous display of flt.an-
nunciations
613A Gnd O/Cprot. w. P.System Data 1 Ignd (measured)
3I0 (calcul.) Ignd (measured) Ground Overcurrent protection
with
614A OP. QUANTITY 59 P.System Data 1 Vphph
V2 Vphph Opera. Quantity for 59 Overvolt.
Prot.
615A OP. QUANTITY 27 P.System Data 1 V1
Vphph V1 Opera. Quantity for 27 Undervolt.
Prot.
640 Start image DD Device, General image 1
image 2
image 3
image 4
image 5
image 6 image 1 Start image Default Display
1101 FullScaleVolt. P.System Data 2 0.10 .. 800.00 kV 12.00 kV Measurem:FullScaleVolt-
age(Equipm.rating)
1102 FullScaleCurr. P.System Data 2 10 .. 50000 A 100 A Measurem:FullScaleCur-
rent(Equipm.rating)
1103 RG/RL Ratio P.System Data 2 -0.33 .. 7.00 1.00 RG/RL - Ratio of Gnd to Line Re-
sistance
1104 XG/XL Ratio P.System Data 2 -0.33 .. 7.00 1.00 XG/XL - Ratio of Gnd to Line Re-
actance
1105 x' P.System Data 2 1A 0.0050 .. 15.0000
Ω
/mi 0.2420
Ω
/mi x' - Line Reactance per length
unit
5A 0.0010 .. 3.0000
Ω
/mi 0.0484
Ω
/mi
1106 x' P.System Data 2 1A 0.0050 .. 9.5000
Ω
/km 0.1500
Ω
/km x' - Line Reactance per length
unit
5A 0.0010 .. 1.9000
Ω
/km 0.0300
Ω
/km
1107 I MOTOR START P.System Data 2 1A 0.40 .. 10.00 A 2.50 A Motor Start Current (Block 49,
Start 48)
5A 2.00 .. 50.00 A 12.50 A
1108 P,Q sign P.System Data 2 not reversed
reversed not reversed P,Q operational measured
values sign
1201 FCT 50/51 50/51 Overcur. ON
OFF ON 50, 51 Phase Time Overcurrent
1202 50-2 PICKUP 50/51 Overcur. 1A 0.10 .. 35.00 A;
∞
2.00 A 50-2 Pickup
5A 0.50 .. 175.00 A;
∞
10.00 A
1203 50-2 DELAY 50/51 Overcur. 0.00 .. 60.00 sec;
∞
0.00 sec 50-2 Time Delay
1204 50-1 PICKUP 50/51 Overcur. 1A 0.10 .. 35.00 A;
∞
1.00 A 50-1 Pickup
5A 0.50 .. 175.00 A;
∞
5.00 A
1205 50-1 DELAY 50/51 Overcur. 0.00 .. 60.00 sec;
∞
0.50 sec 50-1 Time Delay
1207 51 PICKUP 50/51 Overcur. 1A 0.10 .. 4.00 A 1.00 A 51 Pickup
5A 0.50 .. 20.00 A 5.00 A
1208 51 TIME DIAL 50/51 Overcur. 0.05 .. 3.20 sec;
∞
0.50 sec 51 Time Dial
1209 51 TIME DIAL 50/51 Overcur. 0.50 .. 15.00 ;
∞
5.00 51 Time Dial
1210 51 Drop-out 50/51 Overcur. Instantaneous
Disk Emulation Disk Emulation Drop-out characteristic
Addr. Parameter Function C Setting Options Default Setting Comments