Define
4.8 Program setting data
Cylindrical grinding
60
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Times Counters
Figure 4-25 Times, Counters
Meaning:
●
Total parts: Total number of workpieces produced (total actual)
●
Parts requested: Number of workpieces required (workpiece setpoint)
●
Number of parts: This counter registers the number of all workpieces produced since the
starting time.
Note
The counter functionality is set using the following channel-specific machine data:
•
MD27880 $MC_PART_COUNTER, the workpiece counter is activated
•
MD27882 $MC_PART_COUNTER_MCODE[0-2], workpiece counting with user
defined M command
●
Total runtime: Total runtime of NC programs in AUTOMATIC mode
In the AUTOMATIC mode, the runtimes of all programs between NC START and end of
program / RESET are summed up. The timer is zeroed with each power-up of the control
system.
●
Program runtime Active tool operating times
The runtime between NC Start and End of program / Reset is measured in the selected
NC program. The timer is reset with the start of a new NC program.
●
Feedrate runtime
The runtime of the path axes is measured in all NC programs between NC START and
end of program / RESET without rapid traverse active and with the tool active. The
measurement is interrupted when a dwell time is active.
The timer is automatically reset to zero in the case of a "Control power-up with default
values".
7LPHV
0XOWLSOLHU