Define
4.8 Program setting data
Cylindrical grinding
58
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
4.8
Program setting data
Functionality
The setting data are used to define the settings for the operating states. These can be
changed as necessary.
Operating sequence
These can be found in the <OFFSET PARAM> operating area.
Press the "Setting data" softkey. The start screen "Setting data" is opened. Other softkey
functions are available here with which you can set various control system options.
Figure 4-23 Setting data start screen
●
JOG feedrate
Feedrate value in JOG mode
If the feedrate value is zero, the control system will use the value stored in the machine
data.
●
Spindle
Spindle speed
●
Minimum / maximum
A limitation of the spindle speed in the "Max." (G26) / "Min." (G25) fields can only be
performed within the limit values defined in the machine data.
●
Limitation using G96
Programmable upper speed limitation (LIMS) at constant cutting rate (G96).
2))6(7
3$5$0
6HWWLQJ
GDWD