120
70
150
70
185
95
240
120
300
150
400
185
There is a hexagon bolt with a flat washer and a spring washer on the stator frame at the
designated connection point for the grounding conductor. The grounding conductor can be
connected as follows:
● With stranded cables with cable lugs
● With flat cables with cable end designed accordingly
As an alternative, you can connect the grounding conductor without cable lugs using a
clamping plate at the marked connection point.
Connecting the grounding conductor
● Use the connecting terminals designated for the grounding conductor in the terminal box.
● Ensure that the connecting surface is bare and is protected against corrosion using a
suitable substance, e.g. acid-free Vaseline.
● Arrange the flat washer and spring washer under the screw head.
● Check that the maximum permissible clamping thickness of 10 mm for the cable lug or strap
is not exceeded.
● Fasten the clamping screw according to the following table. Screw-in depth and tightening
torque are different depending on whether cable lugs or ground terminals are used.
Screw
Screw-in depth
Tightening torque
When using cable lugs
M6
> 6 mm
8 Nm
M8
> 8 mm
20 Nm
M12 x 25
> 16 mm
38 Nm
M16 x 35
> 20 mm
92 Nm
When using grounding
terminals
M6
> 9 mm
8 Nm
M8
> 12 mm
20 Nm
M10
> 15 mm
40 Nm
M12
> 18 mm
70 Nm
M16
> 20 mm
170 Nm
See also
Electrical connection
6.4 Preparation
SIMOTICS FD 1LH1
84
Operating Instructions 01/2019
Summary of Contents for SIMOTICS FD 1LH1
