Siemens SIMATIC MV420 Operating Instructions Manual Download Page 61

Page: 61 / 424

Image processing

4.2 Code verification

SIMATIC MV420 / SIMATIC MV440
Operating Instructions, 04/2013, A5E02371045-06

4.2.4.6

Graphical support for analysis of verification errors

Simplifying troubleshooting for marking problems

The information used by the reference decoder can be displayed to simplify troubleshooting

for marking problems.
●

The detailed view is activated via "Options" - "Extras" tab/verification details.
You can see the results using the "Monitoring" link on the start page and in the user

interface (Page 223).

The following information is displayed:
●

The grid lines by which the cells are separated.

●

The incorrectly marked cells (shown in red).

●

The correctly marked cells (shown in green).

Example

Summary of Contents for SIMATIC MV420









































































































































































































































































































































































































































Search results

Summary of Contents for SIMATIC MV420

Reviews:

Brands by name

Popular brands

Siemens SIMATIC MV420, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC MV420

Reviews:

Brands by name

Popular brands