manualshive.com logo in svg

Siemens SIMATIC MV420, Operating Instructions Manual

Share
Download
Siemens SIMATIC MV420 Operating Instructions Manual Download Page 36

Image processing 

 

4.1 Reading code (1D and 2D codes) 

 

SIMATIC MV420 / SIMATIC MV440 

34

 

Operating Instructions, 04/2013, A5E02371045-06 

4.1.2.2

 

Performance characteristics when reading qualitatively good data matrix codes 

 

 

Note 
Changing to time-saving image acquisition with half resolution 
If the cells are larger than 10 pixels, change to time-saving image acquisition at half 

resolution. This change is also useful at high object speeds. 

 

The "standard" recognition processes of the reader allow reliable and fast reading of printed 

data matrix codes of good quality. 

Range of application 

●

 

In this mode, the read rates achieved are higher than those when reading complex 

codes. 

●

 

The range of image sizes is from 1.5 to 35 pixels per cell. The range is static. 

●

 

The cells do not overlap or only slightly, nor are the majority isolated. 

●

 

The distortions are minimal, for example due to installation of the reader at an angle. 

●

 

There are no or only a few foreign objects in the area of the code. 

●

 

There are no interference patterns (grooves, granularity) in the area of the code. 

●

 

Fluctuations in contrast are slight. 

Summary of Contents for SIMATIC MV420









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands