Installation and mounting
5.4 Goods acceptance
SICHARGE D
56
Operating Instructions, 02/2021, 8EM5907-0AA00-1AA7.01
5.4
Goods acceptance
5.4.1
Checking the delivery for completeness and correctness
Perform an incoming goods inspection as soon as the goods are delivered. Check the goods
for completeness and correctness based on the delivery documents.
5.4.2
Checking the transport packaging
Start the inspection of the transport packaging with a visual inspection of the shock indicator.
Checking the shock indicator
A shock indicator is attached to the charging station to detect the occurrence of extreme G
forces. The indicator tube shows that the tolerance limit for G-forces has been exceeded by
red coloring.
①
Indicator tube
Figure 5-5
Schematic example: Shock indicator
The shock indicator monitors any G-forces acting during the entire transport. If the charging
station is subjected to unacceptably high G-forces during transport, the shock indicator is
triggered. The indicator tube shows that the tolerance limit for G-forces has been exceeded
by red coloring.
Perform a visual inspection of the shock indicator as follows:
1.
Check whether there is a shock indicator on the charging station.
2.
Check whether the glass tube in the middle of the indicator has turned red.
3.
Check whether the serial number of the indicator matches the number on the delivery note.
4.
When an indicator is red, missing or deviating from the delivery note, report this to the
carrier immediately.
The carrier must confirm the red colored or missing indicator on the receipt.
