Operation
7.4 Stopping the charging process
SICHARGE D
82
Operating Instructions, 02/2021, 8EM5907-0AA00-1AA7.01
7.4
Stopping the charging process
Automatic stopping
The following scenarios result in automatic termination of the charging process:
•
Vehicle ends charging process regularly
•
Vehicle detects a fault
•
Charging station detects an internal critical error (internal)
•
Emergency shutdown is triggered by operating the emergency stop switch or opening the
device doors (external)
Manual stopping
To stop the charging process manually, you must be logged in. Switch to the detail view of
your charging process. You can end the charging process by pressing the "Stop charging"
button on the bottom right. You will be asked if you want to end the charging process.
Confirm by tapping the button on the bottom right again.
Figure 7-4
Stopping the charging process
Depending on the configuration of the backend, users may need to authenticate themselves
again to confirm. All instructions are displayed on the touch screen. After successful
completion, the display changes again and you receive a summary of information about your
charging process. This information again depends on the selected charging port and the
available rate information.
