Installation and mounting
5.6 Connecting the charging station
SICHARGE D
72
Operating Instructions, 02/2021, 8EM5907-0AA00-1AA7.01
Connections for the auxiliary power supply
Figure 5-14 Connections for the auxiliary power supply
Connect the line conductors to the circuit breakers and the neutral conductors to the
terminals on the right next to the circuit breakers. Cable cross-sections up to a maximum of
4 mm2 can be connected to the terminals for the auxiliary power supply.
The connections are intended exclusively for supplying dispensers. These circuits are not
protected against residual currents, e.g. by a residual current circuit breaker.
Integration into the control system of the charging station
The dispensers are not autonomous charging points. Many components are only present in
the central charging station, including the control system, for example. Consequently, the
dispensers need to be integrated into the control system and automation of the charging
station.
Ethernet cables
The dispensers are connected to the central charging station via Ethernet cables. This ensures
communication and remote access to the dispensers through the backend.