Siemens SICAM CMIC, User Manual

Page: 234 / 414

Engineering via SICAM WEB
234
SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
Halt Function
By means of clicking on the button you can halt the display of new events. If new events
occur, then they are recorded furthermore in the event buffer, but not displayed in the table.
Depending on the state the button changes its design:
•
Event display halted and no new event occurred:
•
Event display halted and new event occurred:
By means of clicking the green button the new events are displayed in the table.
By means of clicking the general button the event list is reloaded. With activated halt
function, this is thereby not canceled.
Structure of the Table
Column Value Meaning/Note
Class Diagnosis Diagnosis event
Process Process event
Name <Signal name> Max. 99 characters, only if engineered with
SICAM WEB
(applies for process events)
104 address <IEC 60870-5-101/104 address> Parameterized CASDU1-CASDU2-IOA1-
IOA2-IOA3
(applies for process events)
TI <Number> Type identification (30, 31, 45, 46)
(applies for process events)
Process text <Error class) Internal diagnosis class
(applies for diagnosis events)
<Status name> Max. 13 characters
(applies for process events)
Value Coming
Going
defined status text
(applies for diagnosis events)
<Status text On>
<Status text Off>
<Status text faulty position>
<Status text intermediate position>
freely parameterizable status text
(applies for process events)
Quality NT
IV
At failure of I/O module
If value invalid
(applies for process events)
Time tag YYYY-MM-DD,
Thh:mm:ss:ms+hh:mm Date and time
Note
When selecting another menu within the session (e.g. settings, signals), the content of the table remains,
but the polling for new events is stopped. If the event page is reopened again, all events since leaving the
event page are automatically loaded.
If during the leaving of the event page a ring buffer overflow occurred, only the last 4000 events can be
loaded.