Siemens Servo i, Service Manual, Page: 5 / 70

E382 E407E 061 01 01 02 Siemens-Elema AB
Servo … Important
1 - 5
Important
To the responsible service personnel
• The contents of this document are not binding.
If any significant difference is found between the
product and this document, please contact
Siemens for further information.
• We reserve the right to modify products without
amending this document or advising the user.
• Only personnel trained and authorized by
Siemens shall be permitted to perform
installation, service or maintenance of
the Servo … System. Only Siemens
genuine spare parts must be used.
PC boards (spare parts) must always be kept in a
package for sensitive electronic devices. Siemens
will not otherwise assume responsibility for the
materials used, the work performed or any
possible consequences of same.
• The device complies to standards and require-
ments as stated in the Servo … Ventilator System –
User's manual.
Installation
• Only personnel trained and authorized
by Siemens shall be permitted to install
the Servo … System. The installation and
handing over procedures are described
in the ”Servo … Ventilator System –
Installation Instructions”.
Functional check
• After any installation, maintenance or service
intervention in the Servo … System, perform a
Pre-use check according to instructions in the
Servo … Ventilator System – User's manual.
Service
• The Servo
…
System must be serviced at
regular intervals by personnel trained
and authorized by Siemens.
Any maintenance or service must be
noted in a log book provided.
• It is recommended that maintenance
and service is done as a part of a service
contract with Siemens.
• Preventive maintenance must be performed at
least once every year as long as the unit is not
used more than normal. Normal operation is
estimated to correspond to approx. 5.000 hours
of operation. Details are found in this Service
Manual, chapter ”Preventive maintenance”.
• Worn-out batteries must be recycled or
disposed of properly according to local
regulations. Recycle facilities may not
be available in all areas.
• Batteries must not be disposed of with
ordinary waste. All other disposable
parts shall be discarded according to
local regulations and in an environmen-
tally acceptable way.
• When working with ESD sensitive
components, always use a grounded
wrist band and a grounded work
surface. Adequate service tools must
always be used.
1