Siemens Servo i, Service Manual, Page: 34 / 70

Siemens-Elema AB
Disassembling and assembling Servo …
E382 E407E 061 01 01 02
4 - 8
4
To remove the gas modules:
• Loosen the screw (1).
• Lift off the gas module bracket (2).
• Pull out and lift off both gas modules.
SVX9114X
a s
Note 1
When assembling, make sure that the connector muff
properly seals around the inspiratory pipe (1).
The connector muff must not be pushed too far onto
the nozzle units (2).
Note 2
The gas modules used in Servo … are factory adjusted
for this purpose. When replacing gas modules, make
sure to use only Servo
… gas modules. Similar gas
modules intended for the Siemens SV 300/300A or
K
ION
Systems must not be used.
SVX9145X
a s s
SVX9115X