Siemens Servo i, Service Manual, Page: 27 / 70

E382 E407E 061 01 01 02
Siemens-Elema AB
Servo … Disassembling and assembling
4 - 1
4
4. Disassembling and assembling
General .............................................................. 4 - 2
Preparations ...................................................... 4 - 2
Handling PC boards ........................................... 4 - 2
Replacing PC boards ......................................... 4 - 2
Assembling guidelines ...................................... 4 - 2
User Interface .................................................... 4 - 3
Patient Unit ....................................................... 4 - 4
Only personnel trained and authorized by
Siemens shall be permitted to perform
installation, service or maintenance of the
Servo
… System.
Make sure that the Servo … System is properly
cleaned before performing any service or
maintenance; routine cleaning as well as extended
cleaning. For cleaning procedures, refer to the
”Servo
… Ventilator System – User's manual”.
Any service or maintenance must be noted in a log
book.
All disposable parts must be discarded according
to local regulations and in an environmentally
acceptable way.
After any service or maintenance of the Servo …
System, perform a ”Pre-use check”. Refer to the
”Servo
… Ventilator System – User's Manual” for
details.