manualshive.com logo in svg

Siemens SENTRON PAC3100, Manual, Page: 17 / 152

Share
Download
Siemens SENTRON PAC3100 Manual Download Page 17

 

Description 

 

3.2 Measuring inputs 

SENTRON PAC3100 
Manual, 07/2009, A5E02385159B-01 

17

 

Protection   

Password protection on the device by means of 4-character code. 

See also 

Measured variables (Page 21) 
Technical data (Page 105) 

3.2

 

Measuring inputs 

Current measurement 

 

CAUTION 

 

AC current measurement only 
The device is not suitable for measuring DC current. 

 

SENTRON PAC3100 is designed for: 
●

 

Measuring current of 5 A for connecting standard current transformers. Each current 

measuring input can take a continuous load of 10 A (max. 300 V). Surge withstand 

capability is possible for currents up to 100 A and a duration of 1 s. 

Voltage measurement 

 

CAUTION 

 

AC voltage measurement only 
The device is not suitable for measuring DC voltage. 

 

SENTRON PAC3100 is designed for: 
●

 

Direct measurement on the system or using voltage transformers. The measuring voltage 

inputs of the device measure direct via protective impedances. External voltage 

transformers are required to measure higher voltages than the permissible rated input 

voltages. 

●

 

Measuring voltage up to 277 V / 480 V. The device is designed for measuring input 

voltages up to 277 V to the neutral conductor and 480 V to the external conductor. 

Summary of Contents for SENTRON PAC3100

























































































































































Reviews:

No comments