Siemens SENTRON PAC3100 Manual Download Page 12

Page: 12 / 152

Introduction

1.3 Components of the product

SENTRON PAC3100

Manual, 07/2009, A5E02385159B-01

1.3

Components of the product

Description

The package includes:
●

1 SENTRON PAC3100

●

2 brackets for panel mounting

●

1 plug-in terminal block for RS 485 connection

●

1 SENTRON PAC3100 Operating Instructions

1.4

Latest information and correction sheet

Up-to-the-minute information

You can obtain further assistance by calling the following numbers:
Technical Assistance:

Phone:

+49 (0) 911-895-5900 (8:00 – 17:00 CET)

Fax:

+49 (0) 911-895-5907

On the Internet at:
E-mail: Technical Assistance (

mailto:[email protected]

)

Internet: Technical Assistance (

http://www.siemens.de/lowvoltage/technical-assistance

)

Correction sheet

A correction sheet is included at the end of the manual. Please use it to record your

suggestions for improvements, additions and corrections, and return the sheet to us. This will

help us to improve the next edition of the manual.

1.5

Further documentation

Overview

You can find more information in the "SENTRON PAC3100" Operating Instructions and on

the Internet.

Summary of Contents for SENTRON PAC3100

























































































































































Search results

Summary of Contents for SENTRON PAC3100

Reviews:

Siemens SENTRON PAC3100, Manual, Page: 12 / 152

Search results

Summary of Contents for SENTRON PAC3100

Reviews: