Siemens SCALANCE XR-500 Operating Instructions Manual Download Page 98

Page: 98 / 112

Dimension drawings

9.4 Mounting brackets for use on ships

SCALANCE XR-500

Operating Instructions, 05/2017, A5E03275845-11

You will find the more information on the construction of the mounting brackets in the section

"Technical data (Page 83)".

Note
Different mounting brackets
For the SCALANCE XR524-8C and SCALANCE XR526-8C, the mounting brackets for left

and right are identical.
For SCALANCE XR528-6M and SCALANCE XR552-12M, you require different mounting

brackets. The mounting brackets on one side are identical but the mounting brackets for left

and right are different.

Note
ISO tolerance and punching burr
For dimensions without tolerance details, the general tolerances "medium" acc. to DIN ISO

2768 apply. No punching burrs are permitted.

Brackets for the SCALANCE XR524-8C and SCALANCE XR526-8C

View from the front, top, and side

Dimensions are specified in mm.

Summary of Contents for SCALANCE XR-500

















































































































Search results

Summary of Contents for SCALANCE XR-500

Reviews:

Related manuals for SCALANCE XR-500

Brands by name

Popular brands

Siemens SCALANCE XR-500, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE XR-500

Reviews:

Related manuals for SCALANCE XR-500

Brands by name

Popular brands