Power cables for SCALANCE XR326-2C PoE WG
To connect a SCALANCE PSR9230PoE PoE power supply, use the preassembled power cable
supplied
①
.
To connect two SCALANCE PSR9230PoE, you need two power cables
①
. Disconnect the plug
from one cable. Connect the two free single cores with a plug of the other cable
②
as illustrated.
The work must be performed by a specialist.
Figure 6-5
Connecting the power cable
Single core
Assignment
Dashed
+54 V DC
Solid
Ground
Connecting the PoE power supply
You needed the following tools:
• Torx screwdriver, size T10
• Slotted screwdriver, blade width 3.5 mm
Connecting up
To connect the PoE power supply, proceed as follows:
1. Loosen the screws of the cover with a Torx screwdriver.
2. Remove the cover.
3. Insert and screw the plug with a slotted screwdriver (torque 0.5 Nm - 0.6 Nm).
Disconnecting
To disconnect the PoE power supply, proceed as follows:
1. Switch off the PoE power supply.
2. Loosen the screw connection with a slotted screwdriver and pull out the plug.
3. Screw the cover with a Torx screwdriver (torque 0.4 Nm).
Connecting up
6.6 PoE power supply (power expansion)
SCALANCE XR-300WG
Operating Instructions, 03/2021, C79000-G8976-C454-07
61
