Siemens SCALANCE W738-1 M12 Configuration Manuals Download

Page: 484 / 616

Requirement

You are in the Global configuration mode.
The command prompt is as follows:

cli(config)#

Syntax

Call up the command with the following parameters:

user-group <user-group-name> role <role-name> [description <user-
group-description>]

The parameters have the following meaning:

Parameter

Description

Range of values / note

user-group

Keyword for a group name

user-group-name

Group name

Enter the name of the group. The name

must match the group on the RADIUS

server.
The name must meet the following condi‐

tions:
● It must be unique.
● It must be between 1 and 64

characters long.

role

Keyword for the role name

role-name

Role name

Enter a role name. Users who are author‐

ized with the linked group on the RADIUS

server receive the rights of this role locally

on the device.
You can choose between system-defined

and self-defined roles.

description

Keyword for the description

user-group-
description

Content of the description

Enter a description for the link. The de‐

scription text can be up to 100 characters

long.

Result

The group is linked to a role.

Further notes

You delete a link with the

no user-group

command.

You show the created links with the

show user-groups

command.

Security and authentication
11.1 User rights management

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

484

Configuration Manual, 09/2017, C79000-G8976-C324-08

Summary of Contents for SCALANCE W738-1 M12









































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W738-1 M12

Reviews:

Related manuals for SCALANCE W738-1 M12

Brands by name

Popular brands

Siemens SCALANCE W738-1 M12, Configuration Manuals

Search results

Summary of Contents for SCALANCE W738-1 M12

Reviews:

Related manuals for SCALANCE W738-1 M12

Brands by name

Popular brands