manualshive.com logo in svg

Siemens SCALANCE W738-1 M12, Configuration Manuals

Share
Download
Siemens SCALANCE W738-1 M12 Configuration Manuals Download Page 485

11.1.4.8

no user-group

Description

With this command, you delete the link between a group and a role.   

Requirement

You are in the Global configuration mode.
The command prompt is as follows:

cli(config)#

Syntax

Call up the command with the following parameters:

no user-group <user-group-name>

The parameter has the following meaning:

Parameter

Description

Range of values / note

user-group-name

Group name

Enter the name of a group.

Result 

The link is deleted.

Further notes

You link a group with a role with the 

user-group

 command.

You show the created links with the 

show user-groups

 command.

11.1.4.9

username

Description

With this command, you change the password of the factory set default user "

admin

". 

Requirement

You are in the Global Configuration mode.
The command prompt is as follows:

cli(config)#

Security and authentication

11.1 User rights management

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

485

Summary of Contents for SCALANCE W738-1 M12









































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands