Siemens SCALANCE W738-1 M12 Configuration Manuals Download

Page: 424 / 616

8.6.2.13

no snmp group

Description

With this command, you delete the details of an SNMP group.

Requirement

You are in the Global configuration mode.
The command prompt is as follows:

cli(config)#

Syntax

Call up the command with the following parameters:

no snmp group <GroupName> user <UserName> security-model {v1|v2c|v3}

The parameters have the following meaning:

Parameter

Description

Range of values / note

GroupName

Name of the group

max. 32 characters

user

Keyword for the user name

UserName

Name of the user

max. 32 characters

security-model

Specifies which security settings are

used for sending.

●

v2c

●

Result

The details of the group are deleted.

Further notes

You change the details of an SNMP group with the

snmp group

command.

You display the created SNMP groups with the

show snmp group

command.

You display the created SNMP users with the

show snmp user

command.

8.6.2.14

snmp notify

Description

With this command, you configure the details of the SNMP notifications.

Network protocols
8.6 SNMP

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

424

Configuration Manual, 09/2017, C79000-G8976-C324-08

Summary of Contents for SCALANCE W738-1 M12









































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W738-1 M12

Reviews:

Related manuals for SCALANCE W738-1 M12

Brands by name

Popular brands

Siemens SCALANCE W738-1 M12, Configuration Manuals

Search results

Summary of Contents for SCALANCE W738-1 M12

Reviews:

Related manuals for SCALANCE W738-1 M12

Brands by name

Popular brands