Siemens SCALANCE W738-1 M12 Configuration Manuals Download

Page: 480 / 616

Parameter

Description

Range of values / note

user-password

Value for the password

Enter the password.
The following characters must not be in‐

cluded:
● § ? " ; :
● The characters for Space and Delete

must also not be included.

The strength of the password depends on

the set password policy:

low:

Password length: at least 6 charac‐

ters

high

: The password must meet the fol‐

lowing conditions:
● Password length: at least 8 characters
● at least 1 uppercase letter
● at least 1 special character
● at least 1 number

role

Keyword for a role

user-role

Role

Enter a role.
You can choose between system-defined

and self-defined roles.

description

Keyword for the description

user-
description

Content of the description

Enter a description for the user account.

The description text can be up to 100 char‐

acters long.

Result

The user has been created.

Note
User name cannot be changed
After creating a user, the user name can no longer be modified. If a user name needs to be

changed, the user must be deleted and a new user created.

Further notes

You delete a user with the

no user-account

command.

You configure the password policy with the

password policy

command.

You show the created users with the

show user-accounts

command.

You display the currently valid password policy with the

show password-policy

command.

Security and authentication
11.1 User rights management

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

480

Configuration Manual, 09/2017, C79000-G8976-C324-08

Summary of Contents for SCALANCE W738-1 M12









































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W738-1 M12

Reviews:

Related manuals for SCALANCE W738-1 M12

Brands by name

Popular brands

Siemens SCALANCE W738-1 M12, Configuration Manuals

Search results

Summary of Contents for SCALANCE W738-1 M12

Reviews:

Related manuals for SCALANCE W738-1 M12

Brands by name

Popular brands