Siemens SCALANCE W738-1 M12 Configuration Manuals Download

Page: 477 / 616

11.1.4.1

role

Description

With this command, you create roles that are valid locally on the device.

Requirement

You are in the Global configuration mode.
The command prompt is as follows:

cli(config)#

Syntax

Call up the command with the following parameters:

role <role-name> function-rights <function-rights-value(1-15)>
[description <role-description>]

The parameters have the following meaning:

Parameter

Description

Range of values / note

role-name

Role name

Enter a name for the role. The name must

meet the following conditions:
● It must be unique.
● It must be between 1 and 64

characters long.

function-rights

Keyword for the function rights

function-
rights-value

Value of the function rights

Select the function rights of the role.
● 1

Users with this role can read device
parameters but cannot change them.

● 15

Users with this role can both read and
change device parameters.

description

Keyword for the description

role-
description

Content of the description

Enter a description for the role. The de‐

scription text can be up to 100 characters

long.

Security and authentication

11.1 User rights management

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

477

Summary of Contents for SCALANCE W738-1 M12









































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE W738-1 M12

Reviews:

Related manuals for SCALANCE W738-1 M12

Brands by name

Popular brands

Siemens SCALANCE W738-1 M12, Configuration Manuals

Search results

Summary of Contents for SCALANCE W738-1 M12

Reviews:

Related manuals for SCALANCE W738-1 M12

Brands by name

Popular brands