manualshive.com logo in svg

Siemens SCALANCE W738-1 M12, Configuration Manuals

Share
Download
Siemens SCALANCE W738-1 M12 Configuration Manuals Download Page 516

Note
iPCF, iPCF-HT,  iPCF-MC mode enabledt
If you want encryption with AES in iPCF, iPCF-HT or iPCF-MC mode, only keys with a 128 bit 

key length are supported.

Requirement

You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows: 

cli (config-wlan-context-x)#

Syntax

Call up the command with the following parameters:

wlan security cipher { auto | wep | aes | tkip }

The parameters have the following meaning:

Parameter

Description

auto

TKIP or AES is used depending on the capability of the other station. 

wep

WEP (Wired Equivalent Privacy)

A symmetrical stream encryption method with only 40- or 104-bit long keys based 

on the RC4 algorithm (Ron’s Code 4).

aes

AES (Advanced Encryption Standard): 

Strong symmetrical block encryption method based on the Rijndael algorithm that 

further improves the functions of TKIP.

tkip

TKIP (Temporal Key Integrity Protocol): A symmetrical encryption method with the 

RC4 algorithm (Ron’s
Code 4). In contrast to the weak WEP encryption, TKIP uses changing keys de‐

rived from a main key.

Note
The encryption method "TKIP" is not available with the transmission standards "802.11n" and 

"802.11n only".

Result 

The encryption method is configured.

Further notes

You display the settings with the 

show wlan security

 command.

Security and authentication
11.3 WLAN

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

516

Configuration Manual, 09/2017, C79000-G8976-C324-08

Summary of Contents for SCALANCE W738-1 M12









































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands