manualshive.com logo in svg

Siemens SCALANCE W1788-1 M12, Configuration Manual

Share
Download
Siemens SCALANCE W1788-1 M12 Configuration Manual Download Page 315

Description

Table 1 has the following columns:
● Column 1

Shows that the settings are valid for all ports of table 2.

● within own VAP / with other VAPs / with Ethernet / Client Limiter

In the drop-down list, select the setting for all ports. If "No Change" is selected, the entry in 

table 2 remains unchanged.

● Copy to Table

If you click the button, the setting is adopted for all ports of table 2.

Table 2 has the following columns:
● Radio

Shows the available WLAN interfaces.

● Port

Shows the VAP interface.

Configuring with Web Based Management

6.10 "Security" menu

SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management

Configuration Manual, 11/2019, C79000-G8976-C485-03

315

Summary of Contents for SCALANCE W1788-1 M12

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands