manualshive.com logo in svg

Siemens SCALANCE W1788-1 M12, Configuration Manual

Share
Download
Siemens SCALANCE W1788-1 M12 Configuration Manual Download Page 298

Procedure

Creating a role
1. Enter the name for the role.
2. Click the "Create" button.
3. Select the function rights of the role.
4. Enter a description of the role.
5. Click the "Set Values" button.
Deleting a role
1. Select the check box in the row to be deleted.
2. Click the "Delete" button. The entries are deleted and the page is updated.

6.10.1.3

Groups

User groups

On this page you link a group with a role.
In this example the group "Administrators" is linked to the "admin" role: The group is defined on 

a RADIUS server. The role is defined locally on the device. When a RADIUS server 

authenticates a user and assigns the user to the "Administrators" group, this user is given rights 

of the "admin" role.

Note
The values displayed depend on the rights of the logged-in user.

Configuring with Web Based Management
6.10 "Security" menu

SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management

298

Configuration Manual, 11/2019, C79000-G8976-C485-03

Summary of Contents for SCALANCE W1788-1 M12

















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands