manualshive.com logo in svg

Siemens Prisma 3T, User Manual, Page: 52 / 55

Share
Download
Siemens Prisma 3T User Manual Download Page 52

Revision Date:  3/13/2019 

48 
 

Participant Setup 

1.

 

Position 

your participant  

2.

 

Position the mirror so the participant can see the whole LCD screen 

3.

 

Landmark the participant and move them into the bore  

4.

 

Verify camera positioning  

5.

 

If needed, adjust the camera (in the back of the bore) to see the participant’s eyes through 
the mirror – this step should not need to be done unless someone has accidentally moved 
the camera 

6.

 

Turn the room lights to the HCP LCD setting 

Camera Cleanup

 

1.

 

Close VLC 

2.

 

Change back to duplicate displays 

 

Right click on the desktop and click 

Display settings

 

 

Under 

Multiple Displays

 choose 

Duplicate these displays

  

3.

 

Turn off the extended monitor 

EXT 

on the desktop switch box 

Troubleshooting Tips 

 

1.

 

If the camera will not stream through VLC and you get the below error then: 

 

Unplug and replug the USB cable in the front of the PC desktop – labelled 
MREyes 

 

Close VLC and try again  

 

Summary of Contents for Prisma 3T
























































Reviews:

No comments