manualshive.com logo in svg

Siemens Prisma 3T, User Manual, Page: 15 / 55

Share
Download
Siemens Prisma 3T User Manual Download Page 15

Revision Date:  3/13/2019 

11 
 

Squeeze Ball/Button Alarm 

What to do when the Squeeze Ball/Button Alarm Goes Off 

1.

 

Stop the scanner using the mouse and clicking the stop icon in the lower left on the 
console screen  

2.

 

To clear the alarm, press the talk button on the intercom associated with the squeeze ball 
- Siemens (#2 talk or #3 alarm) or headphones button - Res Tech (TALK) you gave the 
participant 

3.

 

Talk to your participant through the intercom system associated with the headphones you 
gave your participant (res tech, siemens or opto system)  

         

                                                                                                                                                                                                                                                                                                              

4.

 

DO NOT

 press the “Stop” button (#1) on the Siemens Talk Box 

5.

 

If you press this, you will need to reset the table 

6.

 

To reset the table follow the below instructions 

Reset the Table  

1.

 

Press the (#7) button on the side of the intercom box 

2.

 

Go into the scanner room and simultaneously press the Table Up and Table Down button  

Summary of Contents for Prisma 3T
























































Reviews:

No comments