Siemens optiPoint 420 economy, Administrator'S Manual

Page: 74 / 247

Extended Administration
74
FTP Server Requirements
There are no specific requirements on the functionality of the FTP server
to be used. Any FTP server providing standard functionality will do. There
is a variety of servers available including freeware on the internet.
Please read the documentation for the FTP software for details of how to
install and configure the FTP server.
Common FTP Server Access Configuration
The FTP client on the phone will open a session and therefore requires:
• Account name
• Username
• Password
• Path (optional)
Please note that Account name and Username might be the same on the
FTP server used. In this case use the name for setting both parameters.
The parameter path allows you to specify a directory path on the FTP serv-
er where the files you want to up- or download are located. This path is rel-
ative to the path set for the user on the FTP server. The combination of
both settings will make up the full path.
Example: If the user's path on the FTP server is "C:\temp" and the path set
on the phone is "op400\files" the directory where you will need to put the
files is "C:\temp\op400\files".
Parameter
Phone path
(Menu ! page 148)
Web Interface path
(Menu ! page 110)
Download
Server Address
!
page 183
- 03=File transfer
- 06=DL server IP addr.
(change IP address
1
)
1 or host name (if DNS is applicable
!
page 41)
- File transfer
- Download server IP address or
DNS name
(enter IP address
*
)
FTP Account
Name
!
page 187
- 03=File transfer
- 07=FTP account name
(change account name) - File transfer
- FTP account name
(enter account name)
FTP Username
!
page 188
- 03=File transfer
- 08=FTP username
(change username) - File transfer
- FTP username
(enter username)
FTP Password
!
page 187
- 03=File transfer
- 09=FTP password
(change password) - File transfer
- New/Confirm FTP password
(enter/re-enter password)
FTP Path
!
page 187
- 03=File transfer
- 10=FTP
path
(change
path
)
- File transfer
- FTP
path
(enter
path
)