Siemens optiPoint 420 economy Administrator'S Manual Download Page 171

Page: 171 / 247

Alphabetical Reference

171

Config Update Authentication

Mark if user should have authentication. The following options are always

available.

• On

• Off

page 87

page 135

Config Update DLS IP

If Deployment service is used, enter the

IP address of the server.

page 87

page 135

Config Update Filename

The name part of the system wide configuration file (also used as a tem-

plate to the name of the terminal specific configuration file). The following

options are always available.

• Change

• Continue

page 87

page 135

Config Update File Type

T he extension type part of the system wide configuration file (also used

as a template to the name of the terminal specific configuration file).The

following options are always available.

• Change

• Continue

page 87

page 135

Config Update FTP IP

The IP address of the FTP server used for the Configuration download. The

address and port are normally obtained at startup from DHCP (as a vendor

specific extension), or failing that from DNS (as a text record associated

with the phone's domain name). The address obtained automatically up-

dates this menu item. If the DHCP or DNS methods do not yield a valid IP

address the menu item value will be used if it holds a non-null IP address.

If the IP address had been obtained by DHCP then it cannot be altered. In

other cases selecting the OK button will invoke the IP Number Editor to

edit the address. The updated address will be used the next time that a

config download is performed. The IP address will be set during startup if

a valid IP address is obtained from DHCP or DNS.

page 87

page 135

Summary of Contents for optiPoint 420 economy
























































































































































































































































Search results

Summary of Contents for optiPoint 420 economy

Reviews:

Related manuals for optiPoint 420 economy

Brands by name

Popular brands

Siemens optiPoint 420 economy, Administrator'S Manual

Search results

Summary of Contents for optiPoint 420 economy

Reviews:

Related manuals for optiPoint 420 economy

Brands by name

Popular brands