Siemens optiPoint 420 economy Administrator'S Manual Download Page 194

Page: 194 / 247

Alphabetical Reference

194

Layer 2 voice

Can be defined only if the

Layer 2 support is activated (

Quality of Ser-

vice (QoS)).

page 58

page 117

LAN port settings

• Use this function to define the bandwidth at which the optiPoint 410/

420 family S V6.0 should be run. The required value depends on the

bandwidth that the switch or router supports in the network.

• The PC port can setup in the same way as the LAN port.

• The change will only have effect if you restart the phone.

page 59

page 123

Last Restart

• Use this function to view the date and time of the last restart

page 96 of the optiPoint 410/420 family S V6.0.

page 96

LDAP Server IP Address

• If an

LDAP server is being used, enter the

IP address of this serv-

er here.

• IP editor in optiPoint 410/420 family S V6.0

page 159.

page 78

page 136

LDAP server Port

• If an

LDAP server is being used, enter the

Port number here for

communication with this server.

• Valid values: 1 ... 65535.

• Default port is 389

• Number editor in optiPoint 410/420 family S V6.0

page 157.

page 78

page 136

Bandwith

Use

Automatic

in standard case (automatic detection)

10 Mbit/s full

in 10 Mbit networks in full duplex

process

The data can be transmitted

and

received simultaneously.

10 Mbit/s half

in 10 Mbit networks with half duplex

process

The data can only be transmitted

received.

100 Mbit/s full

in 100 Mbit networks in full duplex

process

100 Mbit/s half

in 100 Mbit networks with half duplex

process

Summary of Contents for optiPoint 420 economy
























































































































































































































































Search results

Summary of Contents for optiPoint 420 economy

Reviews:

Related manuals for optiPoint 420 economy

Brands by name

Popular brands

Siemens optiPoint 420 economy, Administrator'S Manual

Search results

Summary of Contents for optiPoint 420 economy

Reviews:

Related manuals for optiPoint 420 economy

Brands by name

Popular brands