Siemens optiPoint 420 economy Administrator'S Manual Download Page 190

Page: 190 / 247

Alphabetical Reference

190

Hot line dial string for selected line

This is the hotline target for this line. Can only be set by administrator in

web interface.

page 128

Hot/Warm Phone

This dropdown allows the user to specify the Hot Line/Warm Line opera-

tion of the phone. There are three options:

•

Normal line Action:

Any Hot Line/Warm Line parameters associated

with the phone will be ignored, regardless of whether or not the phone

is in a keysystem group.

•

Warm line:

If there is a default dial string set against the phone then it

will be automatically dialled (after the delay set with “Initial Digit Tim-

er“) when the user lifts the handset. This occurs regardless of whether

or not the phone is in a keysystem group.

•

Hot line:

There are two cases to consider, depending on whether the

phone is part of a keysystem group.

1. If the phone is part of a keysystem group, there may be a Hot Line dial

string associated with each of the Line keys on the phone

– If there is a Hot Line dial string associated with the line then, it will

be automatically dialled immediately when the line is manually se-
lected.

– If there is not a Hot Line dial string associated with the Line, but

there is a Default dial string set against the phone, then the Default
dial string will be automatically dialled immediately when the line is
manually selected.

– If there is not a Hot Line dial string associated with the Line, and

there is not a Default dial string set against the phone, then the user
will receive dial tone when the line is manually selected.

2. If the phone is not part of a keysystem group.

– If there is a Default dial string set against the phone, then it will be

automatically dialled immediately when the line is manually selected.

– If there is not a Default dial string set against the phone, then the

user will receive dial tone when the line is manually selected.

page 63

page 116

Initial Digit Timer

This timer determines the delay after which the phone goes back to idle

mode or calls a specified number (if "Warm line" is active) when the hand-

set was lifted or the speaker key was pressed and no number was dialled.

page 63

page 116

Summary of Contents for optiPoint 420 economy
























































































































































































































































Search results

Summary of Contents for optiPoint 420 economy

Reviews:

Related manuals for optiPoint 420 economy

Brands by name

Popular brands

Siemens optiPoint 420 economy, Administrator'S Manual

Search results

Summary of Contents for optiPoint 420 economy

Reviews:

Related manuals for optiPoint 420 economy

Brands by name

Popular brands