Siemens optiPoint 420 economy Administrator'S Manual Download Page 174

Page: 174 / 247

Alphabetical Reference

174

Default Route

• Enter the

IP address that was assigned to the router of your IP net-

work if not provided by

DHCP dynamically (

DHCP IP assignment).

• If the value was assigned dynamically, it can only be read.

• The change will only have effect if you restart the phone.

• Value range table:

• Editing by phone: IP Number Editor

page 159.

page 57

page 114

Description

Enter a description for the relevant HiPath 8000 feature here.

page 131 or

page 130

Permitted values

numeric

Length max.

15 digits (incl. dots)

Summary of Contents for optiPoint 420 economy
























































































































































































































































Search results

Summary of Contents for optiPoint 420 economy

Reviews:

Related manuals for optiPoint 420 economy

Brands by name

Popular brands

Siemens optiPoint 420 economy, Administrator'S Manual

Search results

Summary of Contents for optiPoint 420 economy

Reviews:

Related manuals for optiPoint 420 economy

Brands by name

Popular brands