manualshive.com logo in svg

Siemens MAGNETOM Skyra, Owner'S Manual, Page: 98 / 124

Share
Download
Siemens MAGNETOM Skyra Owner'S Manual Download Page 98

Siemens AG Healthcare Sector

11/12

Technical data

26

  

Specific absorption rates

The specific absorption rate for the RF power and the rate of change of the gradient fields 
are checked according to the requirements of norm IEC 60601-2-33.

Cooling system

Two different customer specific cooling alternatives (Separator or Eco Chiller) are avail-
able.

Separator option (for connec-
tion to available cooling sys-
tem)

Water consumption

90 l/min

1

1. Water temperature: 12 °C (45 °F)

Heat dissipation to water

60 kW

Eco Chiller option with auto-
matic adaptation to the 
required cooling demands (e.g. 
different night/day mode) to 
decrease energy cost

GREEN Cooling Package

2

:

•

Automatic start if the surrounding temperature is 
18 °C (64 °F) or less

•

If the temperature is less than –10 °C (14 °F) the 
chiller is switched off

3

2. Free Cooling Unit, optional

3. In case of clinical routine measurement conditions

Summary of Contents for MAGNETOM Skyra





























































































































Reviews:

No comments