Siemens Gigaset S685 IP Manual Download Page 59

Page: 59 / 278

VoIP telephony via Gigaset.net

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / telephony.fm / 5/18/09

ion 8,

.09

.200

If it has

not

been possible to find a

matching

entry, a corresponding message

is displayed. You have the following options:

Press the display key

§New§

to start a new search.

Press the display key

§Change§

to change the search criteria. The previously

entered name is copied and can be edited.

If there are

too many matching

entries in the Gigaset.net directory, the mes-

sage

Too many entries found

is displayed instead of a hit list.

Press the display key

§Refine§

to start a refined search. The previously entered

name is copied and can be edited/expanded.

Calling subscribers

q c

Select the subscriber from the hit list and press the talk key.

Viewing the subscriber's number

Select the subscriber from the hit list.

§View§

Press the display key.

The display shows the Gigaset.net number and the subscriber's name, whereby

the name may appear over a number of lines.

Using other functions

Precondition:

The hit list is displayed.

(Select entry)

§Options§

The following functions can be selected with

Copy to Directory

Copy the number to the handset directory. The number and name (abbrevi-

ated if necessary, max. 16 characters) are copied to the directory.

Edit and save entry where appropriate (

Page 72

The hit list is displayed again.

New search

Start a search with a new name (

Page 56

Own details

See "

Entering, editing and deleting own entry

" on

Page 58

Please note

Connections to Gigaset.net are always established via the Internet irrespec-

tive of which default line is set on your phone. Pressing and holding

pressing it briefly has no effect.

You can open the Gigaset.net directory and establish connections, even if

you have not entered yourself in the Gigaset.net directory.

Please note

If you select a Gigaset.net number from the local directory, the connection is

automatically established via Gigaset.net (Internet).

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands