Siemens Gigaset S685 IP Manual Download Page 118

Page: 118 / 278

116

Operating the base station answering machine

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / answering_m.fm / 5/18/09

ion 8,

.09

.200

If an external call is received during a recording for one of the handset's

receive numbers, the recording is interrupted and the call is signalled on the

handset.

Playing back announcements

Voice Mail

Local AM

Announcements

Play Announce

Play Anc Only

If you have not recorded a personal announcement, the relevant pre-recorded

announcement is played.

Record a new announcement while playing back the announcement:

§New§

Press the display key. For further information,

Page 115

Deleting announcements/announce only

Voice Mail

Local AM

Announcements

Del Announce

Del Anc Only

§Yes§

Press the display key to confirm the prompt.

Press

and

hold

(idle status).

Once you have deleted your announcement, the relevant pre-recorded

announcement will be used again. You cannot delete the pre-recorded

announcements.

Playing back messages

New messages that have not yet been heard are indicated by the

icon in the

display and by the

key flashing on the handset.

You can start to play back the messages in two ways:

Open the answering machine list with the message key.

If the answering machine is set for fast access (

Page 121

): press and

hold

key

Listening to messages via the answering machine list

Precondition:

At least one of your handset's send/receive numbers matches

the receive number of a stored message.
The date and time of each message is logged in the answering machine list

(provided it has been set,

Page 16

) and displayed during the playback. If

Calling Line Identification is activated, the caller's number is displayed. If the

caller's number is saved in the directory, their name is displayed.

Press the message key.

Ans M.

Select and press

§OK§

An announcement informs you if there are new or old messages.

Please note

All messages are played back irrespective of their receive number.

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands