Siemens Gigaset S685 IP Manual Download Page 219

Page: 219 / 278

217

Service (Customer Care)

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 5/18/09

ion 8,

.09

.200

Registration or connection problems with a Bluetooth headset.

Reset the Bluetooth headset (see the user guide for your headset).

Delete registration data from the handset when de-registering the device

(

Page 142

Repeat the registration process (

Page 141

The display is blank.

1. The handset is not switched on.

Press and

hold

the end call key

2. The battery is flat.

Charge the battery or replace it (

Page 14

The keys of a handset do not respond when pressed.

The keypad lock is activated.

Press and

hold

the hash key

(

Page 36

"Base X"

flashes

on the display.

1. The handset is out of range of the base station or the base station's range has

decreased because Eco mode is active.

Move the handset closer to the base station.

Deactivate

Eco Mode

if necessary (

Page 127

2. The handset has been de-registered.

Page 132

3. The base station is not switched on.

Check the base station's mains adapter (

Page 19

4. An update of the base station firmware is currently being conducted (

Page 158

Page 212

Please wait until the update is complete.

Base Search

flashes on the display.

The handset is set to

Best Base

and no base station is turned on or within range.

Move the handset closer to the base station.

Check the base station mains adapter.

Handset does not ring.

1. The ringer is deactivated.

Activate the ringer (

Page 151

2. Call forwarding set to

All Calls

Deactivate call forwarding (fixed line network

Page 60

; VoIP

Page 63

Page 195

You cannot hear a ringer/dialling tone from the fixed line network.

Base station's phone cord has been replaced.

When purchasing a new cord, ensure that it has the correct jack pin connections

(

Page 231

Error tone sounds after system PIN prompt.

You have entered the wrong system PIN.

Re-enter system PIN.

Have you forgotten the system PIN?

Reset the base station to set the system PIN back to 0000 (

Page 156

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands