Siemens Gigaset S685 IP Manual Download Page 38

Page: 38 / 278

Operating the handset

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / starting.fm / 5/18/09

ion 8,

.09

.200

Reverting to idle status

You can revert to idle status from anywhere in the menu as follows:

Press and

hold

the end call key

Or:

Do not press any key: after 2 minutes the display will

automatically

revert

to idle status.

Changes that you have not confirmed or saved by pressing

§OK§

§Yes§

§Save§

§Send§

Save Entry

§OK§

will be lost.

You can find an example of the display in idle status on

Page 1

Activating/deactivating the handset

With the phone in idle status, press and

hold

the end call key to

switch off the handset. You will hear the confirmation tone.

Press and

hold

the end call key again to switch the handset on.

Activating/deactivating the keypad lock

The keypad lock prevents any inadvertent use of the phone.

Press and

hold

the hash key. You will hear the confirmation tone.

The

icon appears in the display when the keypad lock is activated.

The keypad lock deactivates automatically when you receive a call and activates

again after the call.

Please note

The handset displays an advisory message if you press a key by accident while

the keypad lock is on. To deactivate the keypad lock, press and

hold

the hash

key

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands