Siemens Gigaset S685 IP Manual Download Page 103

Page: 103 / 278

101

Messenger

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / messenger.fm / 5/18/09

ion 8,

.09

.200

Opening the buddy list

Precondition

: You are

Online

and have already created a buddy list (using the

PC) on your provider's messenger server.

Messenger

Buddies

Only the first 20 (maximum) buddies on the buddy list will be read by the mes-

senger server and displayed on the handset. The number depends on the avail-

able memory space.

The buddies that are displayed depend on which buddies were transferred from

the messenger server first.

Example:

The Web names (nicknames) of your buddies are displayed on the list. If they

do not have a Web name, the user ID is displayed.
If the name of a buddy is longer than one line, it will be abbreviated. You can

navigate in the list with the control key

The buddies appear on the list in the following order. Their status (

Page 99

)

is identifiable by the colour of the

icon next to the buddies:

§§1§§

Buddies with

Online

status or

Ready for chat

in alphabetical order. The

icon

green

§§2§§

Buddies with

Away

Extended Away

Do not disturb

status in alphabetical or-

der. The

icon is

orange

§§3§§

Buddies with

Offline

Invisible

status in alphabetical order. The

icon is

red

Please note

You can also receive and respond to messages from buddies who are not on

the list displayed on the handset.

Please note

The buddy list will remain open until you exit it (press and release or press and

hold

The handset will not automatically return to idle status.

Buddies

Mark

Julian

Lisa

Herbert

Chat

Info

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands