Siemens Gigaset S685 IP Manual Download Page 101

Page: 101 / 278

Messenger

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / messenger.fm / 5/18/09

ion 8,

.09

.200

Lost connection

If your phone loses its connection to the messenger server, the display key

will flash on the handset that had been connected to the messenger. In idle

status it will display "

Messenger connection failed

". All messages that you had pre-

viously received, as well as any message you were currently writing, will be

saved.
Reconnecting:

Press the message key.

§Yes§

Press the display key to confirm the prompt.

The phone will attempt to reconnect. You are informed about the status of the

connection by messages on the display.
If you reply to the request with

§No§

, the phone will behave as during regular dis-

connection. All messenger messages will be deleted. The phone is offline.

Changing/checking your personal status, going offline

You want to log off (go offline) or let your buddies know whether you wish to

chat or would prefer to remain undisturbed.
You have the following options:

Offline

You log off from the messenger server. The messenger server informs your

buddies that you are no longer available.
The handset switches to idle status. You can neither send nor receive mes-

sages.

Online

(Setting after successful connection)
You are logged on to the messenger server and can send and receive mes-

sages.

Ready for chat

You are

Online

and can send and receive messages.

You invite your buddies to "chat" with you.

Away / Extended Away / Do not disturb

You are

Online

and can send and receive messages. You inform your buddies

that you currently cannot/do not wish to "chat", i.e. will not reply to their

messages immediately.

Invisible

You are

Online

and can send and receive messages.

However, the messenger server indicates to your buddies that you are

Offline

Please note

You can also assign the messenger to one of the display keys on your handset

(

Page 147

). The connection is established when you press the display key.

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands