Siemens Gigaset S685 IP Manual Download Page 132

Page: 132 / 278

130

Setting an appointment (calendar)

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 5/18/09

ion 8,

.09

.200

Displaying missed appointments, anniversaries

Missed appointments/anniversaries (

Page 76

) are displayed in the

Missed

Appts.

list if:

You do not accept an appointment/anniversary.

The appointment/anniversary was signalled during a phone call.

The handset is deactivated at the time of the appointment/anniversary.

Automatic redial was activated at the time of an appointment/anniversary

(

Page 66

The most recent entry is at the head of the list.
If there is a new appointment/anniversary in the list, the display shows

§Appoint.§

Pressing the display key will also open the

Missed Appts.

list.

To open the list from the menu:

Missed Appts.

Select appointment/anniversary.

Information about the appointment/anniversary is displayed.

A missed appointment is displayed with the appointment name

and a missed anniversary is displayed with the last name and

first name. The date and time will also be given.

§Delete§

Delete appointment.

§SMS§

Write an SMS.

Press and

hold

(idle status).

If 10 entries are already stored in the list, the next appointment reminder will

delete the oldest entry.

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands