Siemens Gigaset S685 IP Manual Download Page 214

Page: 214 / 278

212

Web configurator – setting the phone using a PC

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 5/18/09

ion 8,

.09

.200

Starting a firmware update

If necessary, you can load updates of the base station firmware onto your

phone.
The server on which Gigaset Communications makes new firmware versions

available for your base station is set by default. The URL of the Internet server

is displayed in the

Data server

field.

You should only change this URL under exceptional circumstances (e.g. if

requested to do so due to a malfunction). This address is also used to load

provider information from the Internet. You should therefore make a note of

the default URL before you overwrite it. Otherwise, you will only be able to

reactivate the default URL by resetting the base station back to the default set-

tings (

Page 156

Preconditions:

No calls are being made via the fixed line network or VoIP.

There is no internal connection between registered handsets or to

GHC devices.

The base station menu is not open in any of the handsets.

Open the following Web page:

Settings

Miscellaneous

Select the

Update Firmware

button.

The firmware is updated. This process can take up to 3 minutes.

Please note

When updating from the Internet, checks are made to ensure that no

newer

version of the firmware exists. If this is not the case, the operation

is terminated.

The firmware is only loaded from the Internet if you have not entered a

local file in the

User defined firmware file

field prior to the update.

Please note

You can also start the firmware update on the handset (

Page 158

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands