Siemens Gigaset S685 IP Manual Download Page 162

Page: 162 / 278

160

Making VoIP settings

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 5/18/09

ion 8,

.09

.200

If only one provider is available, the countries and providers lists are not dis-

played. Only the name of this provider will then appear in the display. To start

the download, confirm with

§OK§

If your VoIP provider is not included in the list, you need to enter or adjust the

general VoIP settings manually via your phone's Web configurator,

Page 179

Automatic update for the VoIP provider settings

After the first download of the VoIP provider settings, your phone will check

daily whether a newer version of the file for your VoIP provider is available via

the Internet on the Gigaset configuration server. If this is the case, the message

New profile available

will be displayed when the handset is in idle status, and the

message key

flashes.

Press the message key.

§Yes§

Press the display key to confirm the prompt.

Enter the system PIN and press

§OK§

The new data for your VoIP provider will be downloaded and saved on the

phone.

If you answer the prompt with

§No§

, the handset returns to idle status. Your

phone will remind you again later about the new profile (

New profile available

will be displayed again).

Entering/changing VoIP user data

You must complete the VoIP settings with your personal data. You will receive

all necessary data from your VoIP provider.

Telephony

VoIP

(enter system PIN)

Provider Registr.

Change multiple line input:

Username:

Enter the user name (caller ID) for your VoIP provider account.

Username

often identical to your Internet telephone number (the first part of your

SIP address,

Page 182

User Name : / Authent. Password:

Enter the provider-dependent access data that has to be transferred by the

phone to the SIP service at registration.

Click

§Save§

to save the settings.

Please note

If an error occurs during the download, an error message will be displayed.

You can find possible messages and measures in the table on

Page 217

Please note

When making these entries, please remember the VoIP user data is case sensi-

tive. To enter text

Page 232

Please note

A previously set password is not displayed.

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands