Siemens Gigaset S685 IP Manual Download Page 184

Page: 184 / 278

182

Web configurator – setting the phone using a PC

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 5/18/09

ion 8,

.09

.200

Authentication password

Enter the password that you have agreed with your VoIP provider in the

Authen-

tication password

field (maximum 32 characters). The phone needs the pass-

word when registering with the SIP proxy/registrar server.

Username

Enter the caller ID for your VoIP provider account (maximum 32 characters).

This ID is usually identical to the first part of your SIP address (URI, your Internet

phone number).

Display name

(optional)

Enter any name that should be shown in the other caller's display when you call

them via the Internet (example: Anna Sand). All characters in the UTF8 charac-

ter set (Unicode) are permitted. The name must not exceed 32 characters.
If you do not enter a name, your

Username

or your VoIP phone number will be

displayed.
Ask your VoIP provider if this feature is supported.

Area:

General Provider Data

If you have downloaded the general settings for the VoIP provider from the

Gigaset configuration server (

Page 180

), then the fields in this area will be

preset with the data from the download. Generally speaking, you do not need

to configure any settings in this area.

Domain

Specify the last part of your SIP address (URI) here (maximum 74 characters).

Proxy server address

The SIP proxy is your VoIP provider's gateway server. Enter the IP address or the

(fully-qualified) DNS name of your SIP proxy server (maximum 74 characters).

Example:

myprovider.com.

Proxy server port

Enter the number of the communication port that the SIP proxy uses to send

and receive signalling data (SIP port).
Port 5060 is used by most VoIP providers.

Registrar server

Enter the (fully-qualified) DNS name or the IP address of the registrar server

(maximum 74 characters).
The registrar is needed when the phone is registered. It assigns the public IP

address/port number to your SIP address (

Username@Domain

) that were used by

the phone at registration. With most VoIP providers, the registrar server is iden-

tical to the SIP server.

Example:

reg.myprovider.com.

Example

Example: If your SIP address is "[email protected]", enter

"987654321" as the

Username

Example

For the SIP address "[email protected]", enter "provider.com" in

Domain

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands