Siemens Gigaset S685 IP Manual Download Page 58

Page: 58 / 278

VoIP telephony via Gigaset.net

Gigaset S675/S685 IP / GBR / A31008-xxxx-xxxx-x-xxxx / telephony.fm / 5/18/09

ion 8,

.09

.200

Using the keypad, enter the name that you would like to be listed under in

the Gigaset.net directory. The name may contain a maximum of 25 charac-

ters.

Press the right-hand display key

§OK§

If there is already an entry under this name, you will receive a message to this

effect and you will be asked to enter a name again.

If an entry was created successfully in the Gigaset.net directory, the message

Your user name has been added to Gigaset.net!

" is displayed.

Search for subscribers in the Gigaset.net directory

Once the connection to the Gigaset.net directory has been established, you will

be asked to enter a name that you want to search for.

Nickname search:

Enter the name or part of a name (max. 25 characters).

§Options§

Press the display key.

Start search

Select and press

§OK§

If the search has been successful, a hit list will be displayed of all the names that

begin with the specified character string.
Example:

1. 3/50: Entry number/number of hits
2. Name of an entry, possibly abbreviated

You can scroll through the hit list with

Gigaset.net

Your Gigaset.net

nickname:

You have not been able to enter a name ...

If the attempt to create the entry fails you can create it via the Gigaset.net

directory ("

Entering, editing and deleting own entry

Page 58

)

Gigaset.net 3/50

Saal, Franz
Sailor, Ben
Sand, Anna
Sand, Marie Elisabe...
Sand, Otto
Sang, Joseph

View

Options

Summary of Contents for Gigaset S685 IP























































































































































































































































































Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands

Siemens Gigaset S685 IP, Manual

Search results

Summary of Contents for Gigaset S685 IP

Reviews:

Related manuals for Gigaset S685 IP

Brands by name

Popular brands