47
Recording
Recording Programmes Spontaneously
While a programme is running you decide to record it.
Programming a Recording
Your set-top box starts programmed recordings automatically, even from standby
mode. Programmed recordings are only executed on time and fully if the time is set cor-
rectly. Check the relevant settings for your set-top box before you programme a new
recording (see "Time" on page 64).
Single and multiple recordings can be programmed alternately with the assistance of
the EPG (
EPG recording
) or by entering the desired transmission time directly as a timer
(
timer recording
). Adjust the relevant settings as required in the
Recording
pop-up
window, see "Settings in the Recording Pop-Up Window" on page 49.
All programmed recordings are entered as a timer in the
TV
>
Timer
menu
(or
Radio
>
Timer
) and can be managed there.
Programming an EPG Recording
c
Start a spontaneous recording.
The recording begins immediately; the recording icon is displayed in the
upper right corner of the screen for a few seconds.
You can call up the
Stop recording
menu with the
S
button in order
to stop the recording or change the recording duration (see "Changing an
Ongoing Recording" on page 48).
E
Open the EPG.
v
Choose the programme you would like to record (see "Operating the EPG"
on page 38).
i
Open
the
Recording
pop-up window.
v
You can change the settings in the
Repeat:
,
Save:
and
Protection
areas.
o
Confirm your settings in order to activate this EPG recording.
The relevant EPG entry is flagged appropriately (see "Opening the EPG"
on page 38).
